Avenview HDM-SPLITPRO-4A Specifications download pdf (Page 24)

www.avenview.com

2.1.3 DVI-OUT

2.2 General Troubleshooting

Problem

Possible Solution

No Power

 Ensure that DVI-SPLITPRO-2B is plugged in

 If you are recovering from power outage, accidentally unplug the

adapter or other power surge conditions, leave the device off for

a while and then power it on again.

No or Distorted Image

 Make sure all cables are in good working condition and properly

connected to the DVI-SPLITPRO-2B and displays.

 Configure the output video resolution so that it doesn’t excess

the native resolution of the display. ( in this case, the message of

“out of range” is usually showed on your screen)

Poor Quality

 We suggest that don’t use T-connectors to split your video source

into to images displayed on two different screens. That will lower

output video quality. Use a distribution amplifier instead of

T-connectors.

 Make sure the video source is not compressed and maintains the

highest native resolution.

Image Position Shifted

 Press “Auto” key on the remote control

Auto color configuration only works at VGA and Component inputs

Wrong Color

 Press “Color Balance” key for auto configuration.

Auto color configuration only works at VGA and Component inputs.

Supported Mode

Resolution

Supported Mode

Resolution

(HDTV) 720p

1280x720 @50Hz

VESA

1366x768 @60Hz

(HDTV) 720p

1280x720 @60Hz

VESA

1400x1050 @60Hz

(HDTV) 1080p

1920x1080 @60Hz

VESA

1400x1050 @50Hz

VESA

640x480 @60Hz

VESA

1152x864 @75Hz

VESA

800x600 @60Hz

VESA

1600x1200 @60Hz

VESA

1024x768 @60Hz

VESA

1920x1200 @50Hz

VESA

1152x864 @75Hz

VESA

1920x1200 @60Hz

VESA

1280x1024 @60Hz

1 2 ... 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments

Avenview HDM-SPLITPRO-4A Specifications Page 24

Comments to this Manuals

Related products and manuals for Video converters Avenview HDM-SPLITPRO-4A