Avenview VGA-VS-8X1 Specifications download pdf (Page 13)

Page 13

724-746-5500 | blackbox.com

Chapter 3: Installation

3. Installation

Before installation, power off all devices that will be connected to this system.

Make sure that all devices you will connect are properly grounded.

Place cables away from fluorescent lights, air conditioners, and machines that are

likely to generate electrical noise.

NOTE: If no screen displays, follow these steps:

1. Make sure the device cables are correctly and firmly attached.

2. Set your display device’s input source as VGA.

3. Check the PC BIOS configuration for the video output settings.

4. Connect your computer to the display DIRECTLY to check if the video signal

gets through.

3.1 Connection Pattern

Figure 3-1 shows a typical connection of the 4 x 1 VGA Switch with Serial and

3.5-mm Audio.

Figure 3-1. AVSW-VGA4X1A connection.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

No comments

Avenview VGA-VS-8X1 Specifications Page 13