Avenview SW-DVI-4X2 User's Guide download pdf (Page 6)

www.avenview.com

2.1 Auto / Manual Mode Setting

Avenview SW-DVI-4X2 set to Auto Mode when it is started the first time. Auto/Manual mode can be changed

by mode selection switch. In manual mode, each corresponding output to channel (CH1, CH2, CH3, CH4) can

be setup by DIP Switch. e.g: CH1CH2CH3CH4NONECH1, by DIP Switch

2.2 Termination Resister

You can switch ON or OFF terminal resister from the back of the Matrix Switch as shown above.

ON  Setting the Termination Resister

OFF  Remove the Termination Resister

2.3 ID Address Settings

SW-DVI-4X2 Matrix switch can address up to 64ID (0 ~ 63) by Dip Switch.

↓ ON : Set by 1

↑ OFF : Set by 0

1 2 3 4 5 6 7 8 9 10

No comments

Avenview SW-DVI-4X2 User's Guide Page 6