Avenview DVI-VIDEOWALL-4 Specifications download pdf (Page 13)

www.avenview.com

b. Save Setting: This will save current user preferred settings such as the positions and sizes of

the videos, the width or color of border etc. into your favorite setting files.

c. Load Setting: The function will load the favorite settings from the previously saved file.

d. IR Control: This will enable or disable the IR remote control.

e. Auto Sleep: This decides if the DVI-VIDEOWALL-4 enters the deep sleep mode if the video

signal cannot be detected in the main channel.

f. Device ID: This is for identifying the DVI-VIDEOWALL-4 while multiple devices are cascaded

by RS-232 over CAT5 module.

1. Assign an ID for the connected DVI-VIDEOWALL-4:

type a number in the “ID Number” of the device ID

setting area and then click “Write”.

2. Read the ID of the connected DVI-VIDEOWALL-4:

click “Read” and the ID will show up.

3. Super Control: all devices cascaded will receive and

respond the same way when you are operating the

control software.

4. Single Device Control: remove the check beside the

“Super Control” and type a number that represent a

specific MX-1003A and then click “Apply”. Exit the

“Device ID Setting” and click “Connect”.

g. Factory Reset: This will restore all the system values back to the factory default.

h. Exit: Quit the software.

2. Background

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 28 29

No comments

Avenview DVI-VIDEOWALL-4 Specifications Page 13