Avenview W-HDM3D5G-20M-KIT Specifications download pdf (Page 13)

www.avenview.com

Page 11

7. GENERAL TROUBLESHOOTING

PROBLEM POSSIBLE SOLUTION

THE WIRELESS OR VIDEO

LINK LED IS NOT LIT

• If the transmitter and /or Receiver are positioned horizontally

move the units to vertical position. Power cycle both extender

units (OFF 30 sec then ON).

• Reduce the distance between the Transmitter and Receiver units.

Power cycle both extender units

• (OFF 30 sec then ON).

MENU • Re-check all connections and verify they are in the correct

positions and verify the units are powered.

• Check that the wireless and Video Link LEDs are LIT

EXIT • Check the IR Extender cable is connected to the Transmitter unit

• Check that the IR EYE is visible and not being obstructed and the

transmission of IR from the remote can be sent.

• Reposition the IR Flasher to another location near the IR port of

your source device

SOURCE • Reduce the distance (less than 1 meter) between the transmitter

and receiver units and then reconnect power adapter.

• If no picture after Step 1, press REG button on IR remote pointing

towards the transmitter (don’t hold REG button).

• If no picture after Step 1 and step 2, delete the source and re-add

the Transmitter.

1 2 ... 8 9 10 11 12 13 14 15 16

No comments

Avenview W-HDM3D5G-20M-KIT Specifications Page 13