Avenview FO-DVI-DL-1000M User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 17
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
7
1 RS-232 Serial Communications Input
This port is capable of 2-way serial communication between RS-232 devices
connected to the sender and receiver. This port can be connected to a
computer’s serial communications port for interaction with a RS-232 serial
communications device connected to the receiver.
2 DVI-D Output
This receptacle will accept a DVI capable Single-Link output device.
3 Infrared (IR) Window
This sensor captures IR commands from a remote control, then relays the
IR commands from the receiving unit to the sending unit for output to a IR
transmitter (blaster) on a IR controllable device at the A/V source location.
4 LED Power Indicator
This LED will become active once the included 5V DC power supply is properly
connected between the receiver and an open wall power socket.
5 Locking 5V DC Power Input
Connect the included 5V DC power supply to this input. The Power LED will
become active when the 5V DC power supply has been properly connected
to the unit and an open wall power socket. This receptacle features a locking
connector that withstands tugs or tension on the cable, keeping the unit
powered during such events.
6 Infrared (IR) Receiver Extender Port
This port will accept the optional 6-foot IR extension cable (Gefen part# EXT-
RMT-EXTIR). This is useful for installations where the IR Window on the front
panel (Item 2 here) is not in line-of-sight with the IR remote control. An example
of this situation is when the Receiver is tucked away behind furniture or is
located in an equipment rack and only the IR Extender sensor shows.
7 Fiber Optic Connector (Multi-Mode SC Type)
This connector accepts 1 strand of SC terminated ber optic cable that will link
the sending and receiving unit together. The DVI RS-232 over Fiber system will
only accept multi-mode ber optic cabling.
8 RJ-45 Link Connector
This port is used to connect the sending and receiving units together for data
transmission. Use a CAT-5, CAT-5e or CAT-6 cable. When eld terminating
cable please adhere to the TIA/EIA-568-B speci cation (page 9).
RECEIVER PANEL DESCRIPTIONS
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments